Category: Motive Power

I always had a fondness for the blue and gold color scheme of this model that my dad had. He also had some N&W coal hoppers to go along with it. I bought this particular model from eBay as something to practice weathering on. I realized once it arrived that some of the hand rails had been broken, and the bell was missing. The horn broke as I removed the model from the box for the first time, unaware that the cab roof was loose (it fell to the floor). There’s also a small scratch on the front, but otherwise, the model was in good shape.

Because the hand rails are part of the chassis, the only way to replace the railings is to replace the whole chassis. So I would occasionally check eBay for replacements, but never really saw one that was a good deal. At the 2017 Great Train show, however, I found a dummy with missing trucks that had the N&W’s bicentennial color scheme (pictured below). I just have to remove the shell and fuel tank to re-use its chassis, which is molded in the same blue as the powered unit with broken railings. Swapping that part …

Continue Reading →

My dad had this particular model as part of a set that consisted of freight cars branded with Kellogg’s breakfast brands, such as corn flakes and Eggo waffles. Last winter, I found one of these locomotives on eBay, sold as “new in box”. I was pleasantly surprised to find that it really had never been used, but unfortunately, the cab roof was loose, the horn was partly broken upon arrival, and the bell had completely broken off. Fortunately, all of the delicate railings were still intact. I’ve seen this model sold with black trucks and silver trucks, but I think the one my dad had featured black trucks, like this one.

It ran well out of the box, but I still removed the old grease and re-lubricated it. One other small problem the model had was that the original grease had been applied very heavily, and at one point it had started to leak out of the gears, and some of it made its way to the outer shell. No damage was caused to the paint job, it it did require some cleaning.

This was purchased to use for weathering practice. I originally also planned to replace the horn hook …

Continue Reading →

This was another model my dad had in the late 70s, but I have very little memory of it. Mostly I just remember seeing it loose in a large box of mixed items, and I don’t recall ever seeing it run. However, it stuck out in my mind because of its unique shape and color scheme. It was the only c-liner I knew at the time, and it was probably my first exposure to the Pennsylvania Railroad’s “Tuscan Red” color scheme with the five yellow stripes.

While browsing some used HO scale models at the 2017 Great Train Show, I found one of these in good condition for only $10.00. I bought it as yet another locomotive to practice weathering on, and I originally planned to replace the couplers with Kadee knuckle couplers, but later decided the cheap model wasn’t with that effort. I’m just going to list it on eBay after weathering, anyhow.

…

Continue Reading →

By a stroke of luck, this model of my dad’s somehow stayed with my own collection of trains when I moved out on my own after high school, and thus escaped the auction of many of my dad’s trains from his storage unit. Still, it has had a rough life. I have a clear memory from sometime in the early 80s of my dad, brother and me being surprised that it still worked after I was allowed to play with it for quite some time, off the tracks, as if it were a toy. I remember my dad or brother saying, “It’s a miracle!”, and then expressing my delight and surprise by repeating the phrase myself, over and over again. I was less than ten years old at the time. My memory of this model between that point and when I took my own collection with me is basically gone, but by that point, it had sustained damages on several parts:

• Missing draw bar in back (for coupling multiple units)
• Broken/missing draw bar pin on front
• Missing trolley pole spring
• Missing trolley pole retention post
• Broken and glue-smeared window plastic
• Damaged passenger silhouettes in windows
• Cracked chassis
• Missing headlight bulb

Continue Reading →

My dad had one of these models in the late 70s, and it always seemed like a very good runner, with six pick-up and drive wheels on each truck, and a flywheel. Of all of the models in our house, this was the only one with a flywheel. Sometime in the late 80s or early 90s, something went wrong with this engine, possibly a short. It ran slowly and got too hot, eventually melting some of the plastic around the motor, rendering it useless. I later removed the gearing so that it could be pulled as a dummy, and I’m not sure what ever happened to it after that.

I found this same model, with upgraded details, at a good price on eBay last year. It runs just as well, or better, as the one my dad had. The previous owner, who had a B&N layout, had a friend of his add some details, including a new motor and flywheels, Kadee knuckle couplers, a flashing cab roof beacon, MU cables, a fuel tank breather pipe, painted hand rails, new number boards (white lettering on black background), and two parts that I can’t remember the name of (two things that on …

Continue Reading →

Another train that my dad had put together in the late 70s was a series of short passenger cars made by Roundhouse, pulled by an 0-4-0 with slope-back tender made by Model Power. The cars were non-prototypical “Overton” passenger cars built from undecorated kits by Roundhouse. They were shorter than normal passenger cars, but they looked about right for a short line or mountain railroad, and I think they looked okay pulled by the equally short locomotive. One of the things I liked about this model as a kid was the fact that it featured a smoke unit. None of our other HO scale trains did, except for my brother’s short-lived Tyco Chattanooga steam engine. My brother and I called this one “Poppers” because of the way the smoke fluid would occasionally sputter or “pop” out of the smoke stack. My search for a smoking version of this model turned up absolutely nothing. I have a vague recollection of this model coming in a blue Model Power box that had graphics indicating that it was a smoking locomotive, but I have doubts about that memory, because I’ve seen nothing like that on eBay. What I did find is that a …

Continue Reading →

In the late 70s, my dad put together a B&O train consisting of seven Athearn “blue box” heavyweight passenger cars pulled by a blue Mantua 4-6-2 Pacific. He built the cars a couple at a time from kits, upgraded with Kadee couplers and a lighted drum head on the observation car. The engine was a gift to him from my mom. It was the best rolling stock of my dad’s HO collection. Sometime in the early or mid-80s, the family had switched from HO scale to O gauge, and my dad’s HO collection sat in boxes until I got a little older and was allowed to use all of it on my own layouts, except for this set. Using that set required special permission, which I think was only granted temporarily. I’m sure he was proud of the work and money that went into it, and wanted to keep them in good condition. Despite this, I remember that set being basically useless at some point when the draw bar between the locomotive and tender broke, and the coupler on the tender broke. By the time I was a teenager, I wanted to repair it as a favor to my dad …

Continue Reading →